End grain Cutting board with inlay. The picture was created in the upper right corner using 2 different wood.
The picture on the board is achieved in the following way: a hole is cut out on the main board for a drawing with a depth of more than 1 cm and a drawing of a contrasting color is glued in. In doing so, we use glue that is approved in the food industry (see the article "Characteristics of the materials, which we use in production"). The depth, at which the pattern is glued, is optimal for the pattern to "sit" tightly. The drawing itself also has an end surface, like the main board. Such a drawing won't be erased, won't fade, because we don't use any paint in the manufacture of boards. The different colors on the boards are due to the combination of different types of wood and its natural color.
Dimensions 400х250х45 mm.
Material: oak.
Inlay: maple
Feet: rubber, stainless steel screws.
Handmade.
It's possible to engrave the inscription by your request on a cutting board.
The prices for engraving can be found here.
It is possible to customize a similar model according to individual sizes. Production time is 5 days.
Read the recommendations for care.
All of our products are handmade, so it is not possible to get two identical butt-cutting boards. Custom-made - means the manufacture of a cutting board with dimensions, shape and pattern as close as possible to those of the product in the photo.
